Polymer tape 3M™ Stamark™ A650 for temporary horizontal road marking

Polymer tape 3M™ Stamark™ A650 for temporary horizontal road marking and production of speed bumps

Lenta a650 dlya doroghnoy razmetki

 

Description and general information about the product

 

Polymer tape 3M™ Stamark™ A650 is a ready-to-operate product (material), intended for temporary road marking and production of retroreflective elements of speed bumps.

 

The material is delivered in the ready-to-operate rolls with a width of 10, 15 and 20cm.

 

Depending on the purpose and color there are 2 types of Stamark ™ A650: A651E and A654.

 

All tapes are additionally reinforced with polyester mesh. This mesh provides increased strength and durability of the tapes. Temporary road marking tape can be completely, quickly and easily demarcated when you need it.

 

Recommendations for use and application technique:

 

Yellow Polymer Tape 3M ™ Stamark ™ A651E (hereinafter "Tape A651E") is used for the manufacture of retroreflective elements of speed bumps; Application (gluing) of tape on the surface of the speed bump is made in accordance with the manufacturer's specifications.

 

Tape A651E can also be used for permanent horizontal marking. In such case Tape A 63B should be applied by the " treading " in the fresh hot asphalt concrete. Orange Polymer Tape 3M ™ Stamark ™ A654 (hereinafter "Tape A654") is used for temporary horizontal road marking of work-site protection.

 

It is applied to the road surface using a special glue (primer) 3MTM Stamark™ P50. This method ensures secure gluing of the tape to the road and at the same time the tape can be demarcated quickly and efficiently when the reasons for temporary road marking are eliminated.

 

The road can be opened to traffic once after applying the tape!

 

Main technical characteristics:

 

  • High retroreflection coefficient;
  • Increased durability (up to 5-6 mln "tire runovers") and functional endurance in case of  "treading " in the fresh hot asphalt concrete (Tape A651E);
  • High friction coefficient due to special ceramic particles;
  • Preservation of "visibility" (retroreflection coefficient) of temporary and permanent marking for the entire period of operation;
  • Good "rain visibility";
  • Reinforced mesh: high tapes strength and easy demarcation of temporary road marking A654 without any prints left;
  • ecologically sound: does not contain heavy metals, lead chromate or other lead-containing materials;
  • Easy application on the road and speed bumps surface;

 

Photometriccharacteristics:

 

Photometric characteristics of Polymer Tape A650 excel the requirements of State Standard GOST R 54306-2011 "Highway. Communal. Road marking wares. Polymer tapes. Technical requirements " andState Standard GOST R 51256-2011.

 

Technical means of traffic management. Road marking.

 

(КАРТИНКА)

 

Polymer tape 3M™ Stamark™ A650 for temporary horizontal road marking and production of speed bumps

 

Technical information bulletin    November 2012

 

Occupational health and safety:

 

Read all the information related to the health hazards, precautions and First Aid in the Material Safety Data Sheets and/or on the label of chemical products before their usage.

 

Description and general information about the product

 

Polymer tape 3M™ Stamark™ A650 is a ready-to-operate product (material), intended for temporary road marking and production of retroreflective elements of speed bumps. The material is delivered in the ready-to-operate rolls with a width of 10, 15 and 20cm. Depending on the purpose and color there are 2 types of Stamark ™ A650: A651E and A654. All tapes are additionally reinforced with polyester mesh. This mesh provides increased strength and durability of the tapes. Temporary road marking tape can be completely, quickly and easily demarcated when needed.

 

Recommendations for use and application technique:

 

Yellow Polymer Tape 3M ™ Stamark ™ A651E (hereinafter "Tape A651E") is used for the manufacture of retroreflective elements of speed bumps; Application (gluing) of tape on the surface of the speed bump is made in accordance with the manufacturer's specifications.

 

NOTE: Tape A651E can also be used for permanent horizontal marking. In such case Tape A 63B should be applied by the " treading " in the fresh hot asphalt concrete.

 

Orange Polymer Tape 3M ™ Stamark ™ A654 (hereinafter "Tape A654") is used for temporary horizontal road marking of work-site protection. It is applied to the road surface using a special glue (primer) 3MTM Stamark™ P50. This method ensures secure gluing of the tape to the road and at the same time the tape can be demarcated quickly and efficiently when the reasons for temporary road marking are eliminated.

 

The road can be opened to traffic once after applying the tape!

 

Construction of the material

 

picture 1 Construction of Polymer tape A650

 

  1. Glass beads;
  2. Antislip particles;
  3. Polyurethane coating;
  4. Special flexible foundation;
  5. Polyester mesh;
  6. Pressure sensitive adhesive.

 

Main technical characteristics:

 

  • High retroreflection coefficient;
  • Increased durability (up to 5-6 mln "tire runovers") and functional endurance in case of  "treading " in the fresh hot asphalt concrete (Tape A651E);
  • High friction coefficient due to special ceramic particles;
  • Preservation of "visibility" (retroreflection coefficient) of temporary and permanent marking for the entire period of operation;
  • Good "rain visibility";
  • Reinforced mesh: high tapes strength and easy demarcation of temporary road marking A654 without any prints left;
  • ecologically sound: does not contain heavy metals, lead chromate or other lead-containing materials;
  • Easy application on the road and speed bumps surface;

 

Photometric characteristics:

 

Photometric characteristics of Polymer Tape A650 excel the requirements of State Standard GOST R 54306-2011 "Highway. Communal. Road marking wares. Polymer tapes. Technical requirements" andState Standard GOST R 51256-2011 "Technical means of traffic management. Road marking. Classification. Technical requirements".

 

Description and general information about the product

Polymer tape 3M™ Stamark™ A650 is a ready-to-operate product (material), intended for temporary road marking and production of retroreflective elements of speed bumps.

The material is delivered in the ready-to-operate rolls with a width of 10, 15 and 20cm.

Depending on the purpose and color there are 2 types of Stamark ™ A650: A651E and A654.

All tapes are additionally reinforced with polyester mesh. This mesh provides increased strength and durability of the tapes. Temporary road marking tape can be completely, quickly and easily demarcated when you need it.

Recommendations for use and application technique:

Yellow Polymer Tape 3M ™ Stamark ™ A651E (hereinafter "Tape A651E") is used for the manufacture of retroreflective elements of speed bumps; Application (gluing) of tape on the surface of the speed bump is made in accordance with the manufacturer's specifications.

Tape A651E can also be used for permanent horizontal marking. In such case Tape A 63B should be applied by the " treading " in the fresh hot asphalt concrete. Orange Polymer Tape 3M ™ Stamark ™ A654 (hereinafter "Tape A654") is used for temporary horizontal road marking of work-site protection.

It is applied to the road surface using a special glue (primer) 3MTM Stamark™ P50. This method ensures secure gluing of the tape to the road and at the same time the tape can be demarcated quickly and efficiently when the reasons for temporary road marking are eliminated.

The road can be opened to traffic once after applying the tape!

Main technical characteristics:

  • High retroreflection coefficient;
  • Increased durability (up to 5-6 mln "tire runovers") and functional endurance in case of  "treading " in the fresh hot asphalt concrete (Tape A651E);
  • High friction coefficient due to special ceramic particles;
  • Preservation of "visibility" (retroreflection coefficient) of temporary and permanent marking for the entire period of operation;
  • Good "rain visibility";
  • Reinforced mesh: high tapes strength and easy demarcation of temporary road marking A654 without any prints left;
  • ecologically sound: does not contain heavy metals, lead chromate or other lead-containing materials;
  • Easy application on the road and speed bumps surface;

Photometriccharacteristics:

Photometric characteristics of Polymer Tape A650 excel the requirements of State Standard GOST R 54306-2011 "Highway. Communal. Road marking wares. Polymer tapes. Technical requirements " andState Standard GOST R 51256-2011.

Technical means of traffic management. Road marking.

(КАРТИНКА)

Polymer tape 3M™ Stamark™ A650 for temporary horizontal road marking and production of speed bumps

Technical information bulletin    November 2012

Occupational health and safety:

Read all the information related to the health hazards, precautions and First Aid in the Material Safety Data Sheets and/or on the label of chemical products before their usage.

Description and general information about the product

Polymer tape 3M™ Stamark™ A650 is a ready-to-operate product (material), intended for temporary road marking and production of retroreflective elements of speed bumps. The material is delivered in the ready-to-operate rolls with a width of 10, 15 and 20cm. Depending on the purpose and color there are 2 types of Stamark ™ A650: A651E and A654. All tapes are additionally reinforced with polyester mesh. This mesh provides increased strength and durability of the tapes. Temporary road marking tape can be completely, quickly and easily demarcated when needed.

Recommendations for use and application technique:

Yellow Polymer Tape 3M ™ Stamark ™ A651E (hereinafter "Tape A651E") is used for the manufacture of retroreflective elements of speed bumps; Application (gluing) of tape on the surface of the speed bump is made in accordance with the manufacturer's specifications.

NOTE: Tape A651E can also be used for permanent horizontal marking. In such case Tape A 63B should be applied by the " treading " in the fresh hot asphalt concrete.

Orange Polymer Tape 3M ™ Stamark ™ A654 (hereinafter "Tape A654") is used for temporary horizontal road marking of work-site protection. It is applied to the road surface using a special glue (primer) 3MTM Stamark™ P50. This method ensures secure gluing of the tape to the road and at the same time the tape can be demarcated quickly and efficiently when the reasons for temporary road marking are eliminated.

The road can be opened to traffic once after applying the tape!

Construction of the material

picture 1 Construction of Polymer tape A650

  1. Glass beads;
  2. Antislip particles;
  3. Polyurethane coating;
  4. Special flexible foundation;
  5. Polyester mesh;
  6. Pressure sensitive adhesive.

Main technical characteristics:

  • High retroreflection coefficient;
  • Increased durability (up to 5-6 mln "tire runovers") and functional endurance in case of  "treading " in the fresh hot asphalt concrete (Tape A651E);
  • High friction coefficient due to special ceramic particles;
  • Preservation of "visibility" (retroreflection coefficient) of temporary and permanent marking for the entire period of operation;
  • Good "rain visibility";
  • Reinforced mesh: high tapes strength and easy demarcation of temporary road marking A654 without any prints left;
  • ecologically sound: does not contain heavy metals, lead chromate or other lead-containing materials;
  • Easy application on the road and speed bumps surface;

Photometric characteristics:

Photometric characteristics of Polymer Tape A650 excel the requirements of State Standard GOST R 54306-2011 "Highway. Communal. Road marking wares. Polymer tapes. Technical requirements" andState Standard GOST R 51256-2011 "Technical means of traffic management. Road marking. Classification. Technical requirements".


Quality products from the manufacturing plant RTI products 
 OOO «Rezinoplast»


The quality of all products is very high and confirmed quality certificate  Logotip TÜV SÜD ISO 90012008